MAKING YOUR SELECTION EZ!

Back to Help Center

We at Brimar thrive to make your selection, navigation, and shopping experience EZ! and it is because of this that we have created many informational pages like this one to help with your product selection process. Check out below the key features of our most popular products, if more information about specific products is required, click on any of the respective links below to view it.



EZ PIPE MARKERS™ & ARROWS
(Stick On Labels)

  1. Self adhesive markers you peel and stick
  2. Markers' adhesive has been formulated with an extra heavy coating to ensure adhesion to a variety of different pipe and insulation surfaces.
  3. Markers should only be applied to clean and dry surfaces.
  4. Markers comply with ANSI & ASME standards if used in conjunction with arrows, all 3 options of assembly shown on the side are in compliance.
  5. Durability: 4 to 7 years Mid COntinental US
  6. Service Temp: -40 to 180° F
  7. Minimum Application Temp: 50° F
  8. Surface Prep: Clean & Dry
  9. Spec Compliance: ANSI / ASME A13.1 2007
Illustration of EZ Pipe Marker with EZ Arrow in compliance with ASME A13.1
Illustration of EZ Pipe Marker with Arrow Banding Tape in compliance with ASME A13.1
Illustration of EZ Pipe Marker, Banding Tape and EZ Arrow in compliance with ASME A13.1

SYSTEM #1 PIPE MARKERS™
(Wrap Around & Strap On Markers)

  1. Manufactured with rigid PVC vinyl, and printed with UV fade resistant inks.
  2. These Markers are available in 2 ways, Wrap Around and Strap On (strap ons are supplied with holes and 2 nylon ties)
  3. For pipe diameters 3/4" thru 6", use Wrap Around Markers (Styles A, B, C, D, E); these markers are simply uncoiled by hand and automatically recoil around the pipe.
  4. For pipe diameters 6" or larger, use Strap On Markers (Styles F, G, H); these markers are installed using nylon ties or S.S. Strapping, Brimar supplies a pair of nylon ties with each of these markers.
  5. Advantages of System #1 Markers™: No pipe preparation, 360° visibility, speed of installation, arrows included and overall better appearance
  6. Durability: 4 to 7 years outdoors Mid Continental US
  7. Service Temp: -40 to 180° F
  8. Minimum Application Temp: None
  9. Surface Prep: None
  10. Spec Compliance: ANSI / ASME A13.1 2007
Illustration of System #1 (Wrap Around) Pipe Marker in compliance with ASME A13.1
Illustration of System #1 (Strap On) Pipe Marker in compliance with ASME A13.1

SYSTEM #2 PIPE MARKERS™
(Stick On Markers on a Roll)

  1. These markers were designed to be an economical alternative to EZ Pipe Markers.
  2. Each roll consists of 50 markers & 50 arrows
  3. Markers' adhesive has been formulated with an extra heavy coating to ensure adhesion to a variety of different pipe and insulation surfaces.
  4. Available in 2 sizes (Small & Large), use Small Rolls on pipes 3/4" to 2-1/4" O.D. and Large Rolls on pipes 2-1/2" to 7-7/8" O.D.
  5. Durability: 4 to 7 years outdoors Mid Continental US
  6. Service Temp: -40 to 180° F
  7. Minimum Application Temp: 50° F
  8. Surface Prep: Clean & Dry
  9. Spec Compliance: ANSI / ASME A13.1 2007
Illustration of System #2 Pipe Marker on a Roll in compliance with ASME A13.1

SYSTEM #3 PIPE MARKERS™
(Stick On Markers on a Roll - Large Format)

  1. Wrap tape completely around pipe or cut into individual markers
  2. Markers' adhesive has been formulated with an extra heavy coating to ensure adhesion to a variety of different pipe and insulation surfaces.
  3. Available in 2 sizes (Small & Large), use Small Rolls (8" x 30') on pipes 3/4" to 2-1/4" O.D. and Large Rolls (12" x 30') on pipes 2-1/2" to 7-7/8" O.D.
  4. Small Rolls contain 240 markers and arrows
  5. arge Rolls contain 144 markers and arrows
  6. Durability: 4 to 7 years outdoors Mid Continental US
  7. Service Temp: -40 to 180° F
  8. Minimum Application Temp: 50° F
  9. Surface Prep: Clean & Dry
  10. Spec Compliance: ANSI / ASME A13.1 2007
Illustration of System #3 Pipe Marker on a Roll in compliance with ASME A13.1

SYSTEM #4 PIPE MARKERS™
(High Temperature Wrap Around & Strap On Markers)

  1. High temperature, chemical and weather resistant makes this marker the most durable you can buy anywhere.
  2. UV Printed legend is laminated between two layers of polyester, creating an extremely DURABLE product.
  3. These Markers are available in 2 ways: flat markers that Wrap Around pipe and markers that are laminated to Black Carrier (Strap On).
  4. For pipe diameters 1/2" thru 7-7/8", use Wrap Around Markers(Styles 4A, 4B, 4E, 4F); these markers will wrap around pipe and are secured in place by an overlapping clear adhesive strip.
  5. For pipe diameters 8" or larger use Strap On Markers (Styles 4G & 4H); these markers are laminated to a heat and chemical resistant carrier that is then strapped on to pipe with nylon ties or stainless steel strapping.
  6. Durability: 5 to 8 years outdoors Mid Continental US
  7. Service Temp: -40 to 248° F
  8. Minimum Application Temp: None
  9. Surface Prep: None
  10. Spec Compliance: ANSI / ASME A13.1 2007
Illustration of System #4 (Wrap Around) Pipe Marker in compliance with ASME A13.1
Illustration of System #4 (Strap On) Pipe Marker in compliance with ASME A13.1