Product Information
Details
Fire Sprinkler Water Pipe Markers on a Roll are used to identify piping systems and meet specification compliances for ANSI / ASME A13.1 standards for the identification of fire sprinkler system pipes. Fire Sprinkler Water Pipe Markers on a Roll are available in 2 size formats for pipe outside diameters ranging from 3/4 inch to 7-7/8 inches and the alternating legends provide 360 degree visibility when wrapped around piping.
Compliance
Wrap-Around Pipe Markers on a Roll
- Wrap tape completely around pipe or cut into individual markers
- Self adhesive vinyl labels
- Legends alternate so arrows can point in either direction
- Markers' adhesive has been formulated with an extra heavy coating to ensure adhesion to a variety of different pipe and insulation surfaces.
- Available in 2 sizes (Small & Large), use
- Small Rolls (8" x 30 feet long) on pipes 3/4" to 2-1/4" O.D.
- Large Rolls (12" x 30 feet long) on pipes 2-1/2" to 7-7/8" O.D.
- Durability: 4 to 5 years Mid Continental US
- Service Temp: -20°F (-29°C) to 200°F (93°C)
- Minimum Application Temp: 50° F (10° C)
- Surface Prep: Clean & Dry
- Compliance: ASME & ANSI A13.1
Marker Size, Letter Height and Maximum Characters per Marker
The following chart shows the recommended pipe marker letter height and marker size based on the outside pipe diameter of the pipe to be identified. For pipes smaller than 3/4" and for valve identification, the use of a permanent legible tag is recommended.
Pipe O.D. |
Text & Arrow Height |
Marker Size |
Qty of Legends & Arrows |
Marker Style |
Maximum Characters |
3/4" to 2-1/4" |
3/4" |
8" wide |
240 |
Small Roll |
18 |
2-1/2" to 7-7/8" |
1-1/4" |
12" wide |
144 |
Large Roll |
18 |
Colors:
The secondary means of identification is the color code of the marker. The exact colors are contained in the ANSI Z535.1 Safety Color Code.
Color is the secondary means to identification but many times the most important. The color of the marker should be used to identify the characteristic hazard of the contents of the pipe. The following chart list the classifications shown by ANSI / ASME A13.1 2015 as the suggested color combinations for the pipe markers.
ANSI / ASME A13.1 Designation of Colors
FLUID SERVICE |
COLOR COMBINATIONS |
Fire Quenching Fluids |
|
Toxic & Corrosive Fluids |
|
Flammable & *Oxidizing Fluids |
|
Combustible Fluids |
|
Potable, Cooling, Boiler feed, & other Water |
|
Compressed Air |
|
Defined by the User |
|
Defined by the User |
|
Combustible Fluids |
|
Potable, Cooling, Boiler feed, & other Water |
|
* New 2015 classification, Oxidizing Fluids
Reviews