Sprinkler Water Pipe Marker on a Roll
Item #
38081
Marker Reads
Sprinkler Water
Marker Design
Directional Arrow
Compliance
  • ANSI / ASME
  • ECCN Certification

Sprinkler Water Pipe Marker on a Roll

Size:

Material:

Laminate:

Mounting:

Packaging:

Price:
$85.70
Qty
Each
  • 1–9
    $85.70
  • 10–24
    $75.40
  • 25+
    $66.35

Your item has been added to cart.

0 In Stock
Special freight arrangements are necessary.

Need a quote for a large order? Call 855‑444‑9477 or email us.

Product Information

Details

Sprinkler Water Pipe Markers on a Roll are used to identify piping systems and meet specification compliances for ANSI / ASME A13.1 standards for the identification of fire sprinkler system pipes. Sprinkler Water Pipe Markers on a Roll are available in 2 size formats for pipe outside diameters ranging from 3/4 inch to 7-7/8 inches and the alternating legends provide 360 degree visibility when wrapped around piping.

Compliance

Wrap-Around Pipe Markers on a Roll

  • Wrap tape completely around pipe or cut into individual markers
  • Self adhesive vinyl labels
  • Legends alternate so arrows can point in either direction
  • Markers' adhesive has been formulated with an extra heavy coating to ensure adhesion to a variety of different pipe and insulation surfaces.
  • Available in 2 sizes (Small & Large), use
    • Small Rolls (8" x 30 feet long) on pipes 3/4" to 2-1/4" O.D.
    • Large Rolls (12" x 30 feet long) on pipes 2-1/2" to 7-7/8" O.D.
  • Durability: 4 to 5 years Mid Continental US
  • Service Temp: -20°F (-29°C) to 200°F (93°C)
  • Minimum Application Temp: 50° F (10° C)
  • Surface Prep: Clean & Dry
  • Compliance: ASME & ANSI A13.1

Marker Size, Letter Height and Maximum Characters per Marker

The following chart shows the recommended pipe marker letter height and marker size based on the outside pipe diameter of the pipe to be identified. For pipes smaller than 3/4" and for valve identification, the use of a permanent legible tag is recommended.

Pipe O.D. Text & Arrow Height Marker Size Qty of Legends & Arrows Marker Style Maximum Characters
3/4" to 2-1/4" 3/4" 8" wide 240 Small Roll 18
2-1/2" to 7-7/8" 1-1/4" 12" wide 144 Large Roll 18
  • Wrap-Around Pipe Markers on a small Roll
    Small Roll
    For pipe O.D. of 3/4" to 2-1/4"
    Legend Size: 3/4" High
  • Wrap-Around Pipe Markers on a large Roll
    Large Roll
    For pipe O.D. of 2-1/2" to 7-7/8"
    Legend Size: 1-1/4" High

Colors:

The secondary means of identification is the color code of the marker. The exact colors are contained in the ANSI Z535.1 Safety Color Code.
Color is the secondary means to identification but many times the most important. The color of the marker should be used to identify the characteristic hazard of the contents of the pipe. The following chart list the classifications shown by ANSI / ASME A13.1 2015 as the suggested color combinations for the pipe markers.

ANSI / ASME A13.1 Designation of Colors

FLUID SERVICE COLOR COMBINATIONS
Fire Quenching Fluids Red Background With White Text
Toxic & Corrosive Fluids Orange Background With Black Text
Flammable & *Oxidizing Fluids Yellow Background With Black Text
Combustible Fluids Brown Background With White Text
Potable, Cooling, Boiler feed, & other Water Green Background With White Text
Compressed Air Blue Background With White Text
Defined by the User White Background With Black Text
Defined by the User Gray Background With White Text
Combustible Fluids Black Background With White Text
Potable, Cooling, Boiler feed, & other Water Green Background With White Text

* New 2015 classification, Oxidizing Fluids

Reviews

855‑444‑9477
Cart

Your cart is empty.