Hydraulic Information System Sign
Item #
SPR-27-FA
Sign Reads
Hydraulic Information System. Location of the two hydraulically most remote hose connections. Design flow rate for the connections identified above. Design static pressure and design system demand (i.e., flow and residual pressure) at the system control valve, or at the pump discharge flange where a pump is installed, and at each fire department connection.
Compliance
NFPA

Hydraulic Information System Sign

NFPA 13 Compliant

Size:

Material:

Laminate:

Mounting:

Packaging:

Price:
$9.75
Qty
Each
  • 1–9
    $9.75
  • 10–24
    $8.60
  • 25+
    $7.60

0 In Stock
Special freight arrangements are necessary.

Need a quote for a large order? Call 855‑444‑9477 or email us.

Product Information

Details

A Hydraulic Information System Sign is a useful tool which allows the installing contractor to properly identify a hydraulically designed sprinkler system with information required by NFPA 13. It is not an alternative for required protective measures for reducing or eliminating hazards.

Compliance

Sprinkler System Plates

Sprinkler system plates comply with the requirements of NFPA 13. They identify crucial components of a Fire Sprinkler System and the system’s operation. Failure to properly identify a sprinkler system may not only result in code violations and owner/contractor liability, in a worst-case scenario system failure in a fire emergency may occur.

What is NFPA 13?

NFPA 13 is the standard for the Installation of Sprinkler Systems and provides "a reasonable degree of protection for life and property from fire through the standardization of design, installation, and testing requirements for sprinkler systems, including private fire service mains, based on sound engineering principles, test data, and field experience." The standard applies to water supplies, sprinklers, fittings, piping, valves, all materials and accessories.

Where do sprinkler plates and identification signs need to be installed?

NFPA 13 provides a comprehensive table with a sprinkler system signage summary including sign locations and requirements. Identification signs should be permanently marked weatherproof metal signs, secured with corrosion-resistant wire, chain, or other acceptable means.

Identification sign location varies by type, but in general these should be applied on valves controlling and supplying a sprinkler system. Such locations may include:

  1. Control Valves, Drain Valves, Test Connection Valves, Alarm Valves, Dry Pipe Valves, Preaction Valves, and Deluge Valves.
  2. Anti-Freeze Loops, Anti-Freeze Main Valves and Circulating Closed Loop Systems.
  3. Auxiliary Systems
  4. System Control Riser
  • NFPA 13 Hydraulic-System Sign
  • NFPA 13 Automatic Sprinklers Sign
  • NFPA 13 Main Drain Valve Sign

Reviews

855‑444‑9477
Cart

Your cart is empty.