Dom. Hot Wtr Recirc. Wrap-Around Pipe Marker on a Roll

Wrap-Around Pipe Markers on a Roll

• Wrap tape completely around pipe or cut into individual markers
• Self adhesive vinyl labels
• Legends alternate so arrows can point in either direction
• Markers' adhesive has been formulated with an extra heavy coating to ensure adhesion to a variety of different pipe and insulation surfaces.
• Available in 2 sizes (Small & Large), use
  • Small Rolls (8" x 30 feet long) on pipes 3/4" to 2-1/4" O.D.
  • Large Rolls (12" x 30 feet long) on pipes 2-1/2" to 7-7/8" O.D.
• Durability: 4 to 5 years Mid Continental US
• Service Temp: -20°F (-29°C) to 200°F (93°C)
• Minimum Application Temp: 50° F (10° C)
• Surface Prep: Clean & Dry
• Compliance: ASME & ANSI A13.1

Marker Size, Letter Height and Maximum Characters per Marker

The following chart shows the recommended pipe marker letter height and marker size based on the outside pipe diameter of the pipe to be identified. For pipes smaller than 3/4" and for valve identification, the use of a permanent legible tag is recommended.

Colors:

The secondary means of identification is the color code of the marker. The exact colors are contained in the ANSI Z535.1 Safety Color Code.
Color is the secondary means to identification but many times the most important. The color of the marker should be used to identify the characteristic hazard of the contents of the pipe. The following chart list the classifications shown by ANSI / ASME A13.1 2015 as the suggested color combinations for the pipe markers.

ANSI / ASME A13.1 Designation of Colors

FLUID SERVICE	COLOR COMBINATIONS
Fire Quenching Fluids
Toxic & Corrosive Fluids
Flammable & *Oxidizing Fluids
Combustible Fluids
Potable, Cooling, Boiler feed, & other Water
Compressed Air
Defined by the User
Defined by the User
Combustible Fluids
Potable, Cooling, Boiler feed, & other Water

* New 2015 classification, Oxidizing Fluids