Custom Snap-Around Pipe Markers on a Roll

A larger configuration of Markers on a Roll. These markers come in 30 feet long rolls and are also available in 2 sizes; Style Small is 8" x 30 ft with 3/4" text and approximately 240 legend repetitions (including arrows); the second size is Style Large, which is 12" x 30 ft long with 1-1/4" text and approximately 144 legend repetitions (including arrows). On both styles the legends alternate so arrows can point in either direction. Brimar's specially formulated adhesive is applied with a heavy coating to ensure adhesion to a variety of surfaces. Apply markers ONLY to clean and dry surfaces. System #3 Pipe Markers™ comply with ANSI & ASME A13.1 2020 Standard.

Need to design a custom sign but don’t see a template you like? Email us directly at sales@pipemarker.com.

View Details and Pricing
Custom Snap-Around Pipe Markers on a Roll
Loading…
This page could not be loaded. Please try again or contact customer service for assistance.
Select Your Style
Background Color / Text Color

Background color and text color.

Select Your Size
Size Selection

Select your pipe marker size, price will adjust with your selection.

Select Your Text
Pipe Marker Text

Enter your Custom Pipe Marker text here
PIPE MARKER CUSTOM TEXT WILL CONTAIN ONLY CAPITAL LETTERS UNLESS SPECIFIED BELOW

Pipe Marker Text font
Pipe Marker Text alignment

    Additional Information
    Special Instructions

    Enter any additional details for your Custom Pipe Marker


    Product Information

    Brimar System #3 Pipe Markers™ - Continuous Markers on a Roll

    • Wrap tape completely around pipe or cut into individual markers
    • Self adhesive vinyl labels
    • Legends alternate so arrows can point in either direction
    • Markers' adhesive has been formulated with an extra heavy coating to ensure adhesion to a variety of different pipe and insulation surfaces.
    • Available in 2 sizes (Small & Large), use
      • Small Rolls (8" x 30 feet long) on pipes 3/4" to 2-1/4" O.D.
      • Large Rolls (12" x 30 feet long) on pipes 2-1/2" to 7-7/8" O.D.
    • Durability: 4 to 5 years Mid Continental US
    • Service Temp: -20°F (-29°C) to 200°F (93°C)
    • Minimum Application Temp: 50° F (10° C)
    • Surface Prep: Clean & Dry
    • Compliance: ASME & ANSI A13.1

    Marker Size, Letter Height and Maximum Characters per Marker

    The following chart shows the recommended pipe marker letter height and marker size based on the outside pipe diameter of the pipe to be identified. For pipes smaller than 3/4" and for valve identification, the use of a permanent legible tag is recommended.

    Pipe O.D. Text & Arrow Height Marker Size Qty of Legends & Arrows Marker Style Maximum Characters
    3/4" to 2-1/4" 3/4" 8" wide 240 Small Roll 18
    2-1/2" to 7-7/8" 1-1/4" 12" wide 144 Large Roll 18
    • System 3 Small Roll
      Small Roll
      For pipe O.D. of 3/4" to 2-1/4"
      Legend Size: 3/4" High
    • System 3 Large Roll
      Large Roll
      For pipe O.D. of 2-1/2" to 7-7/8"
      Legend Size: 1-1/4" High

    Colors:

    The secondary means of identification is the color code of the marker. The exact colors are contained in the ANSI Z535.1 Safety Color Code.
    Color is the secondary means to identification but many times the most important. The color of the marker should be used to identify the characteristic hazard of the contents of the pipe. The following chart list the classifications shown by ANSI / ASME A13.1 2015 as the suggested color combinations for the pipe markers.

    ANSI / ASME A13.1 Designation of Colors

    FLUID SERVICE COLOR COMBINATIONS
    Fire Quenching Fluids Red Background With White Text
    Toxic & Corrosive Fluids Orange Background With Black Text
    Flammable & *Oxidizing Fluids Yellow Background With Black Text
    Combustible Fluids Brown Background With White Text
    Potable, Cooling, Boiler feed, & other Water Green Background With White Text
    Compressed Air Blue Background With White Text
    Defined by the User White Background With Black Text
    Defined by the User Gray Background With White Text
    Combustible Fluids Black Background With White Text
    Potable, Cooling, Boiler feed, & other Water Green Background With White Text

    * New 2015 classification, Oxidizing Fluids

    Details

    Streamline pipe marking with our Custom Wrap Around Pipe Markers on a Roll, providing customizable solutions for clear and efficient identification of pipes in industrial environments.

    Reviews

    855‑444‑9477
    Cart

    Your cart is empty.